What are the advantages of wrapping my scooter?

Wraps can almost instantly give your electric scooter a new and fresh look without the need for repainting. 

Will the wrap protect my scooters paint from damage?

Wrap film will protect the paint underneath from some sun damage and mild abrasions. It is not designed as a paint protection film, but the wrap does provide some protection between light abuse.

What is the difference between a half wrap and a full wrap?

The Full Wrap uses 52" x 16" of vinyl material, compared to the Half Wrap which uses 52" x 8" of vinyl material. Therefore the Full Wrap contains more pieces and provides a more full coverage of your electric scooter than the half wrap.

How long does a wrap last?

The expected performance life—that is, the length of time the 3M wrap should look good and stay adhered—is up to 7 years if properly maintained. 

How do I take care of my wrap?

  • Wash whenever the scooter appears dirty. Contaminants allowed to remain on the graphic may be more difficult to remove during cleaning.
  • Rinse off as much dirt and grit as possible with a spray of water.
  • Use a wet, non-abrasive detergent.
  • Rinse thoroughly with clean water. To reduce water spotting, immediately use a silicone squeegee to remove water and finish with a clean microfiber cloth.

Will the environment damage the wrap?

Wrap films (just like paint) are degraded by prolonged exposure to sun and atmospheric pollutants, particularly on horizontal surfaces. Whenever possible, store the electric scooter in a garage or at least in a shaded area during the day. At night, protect the scooter from dew or rain, which may contain acidic pollutants (a common problem in many large metropolitan areas).

Can wraps be installed over paint scratches, or dents?

Wrap film is very thin and flexible to allow it to conform beautifully to the contours of your scooter, but that means it also conforms to any imperfection such as a scratch or dent, and that will show through. 

Can a damaged wrap be repaired?

We do not recommend replacing just one part of a wrap as you may not be satisfied with the visual differences that may be apparent, including color shifts due to using film from a different lot or printing done at a later date, and the slight fading or change in gloss that may have occurred on the installed film. However, if you'd still like to proceed we can definitely figure something out!

Can I remove the wrap?

You can, however exposure to sun, heat and other environmental factors will eventually cause the film’s adhesive to degrade. As that happens, removal becomes more difficult and time consuming.  After 3 years it is recommended to use heat to help you remove.

How hard is it to apply the wrap?

The wrap is not hard to apply, it just requires a little patience! A recent customer review said -

"I'm loving it and it's getting a-lot of attention and thumbs up by passerby's! Was very easy to install, although I left a few of the decals off just to have some contrast".

All wraps are printed on 3M vinyl with air release channels making for an easy bubble free install.

How long does it take to apply the wrap?

The Full Size wrap takes approximately 45 minutes to an hour to apply. 

How long does it to receive my wrap after I order?

All orders received must first be printed. Scooty Wrap's prints wraps Monday to Friday from 8:00AM - 5:00PM CT. Printing times vary from 2-3 days. Shipments within the United State's take 2-3 days. Shipments outside of the United States take 7-10 days.

Do you ship outside of the United States?

Yes! Scooty Wrap's ships worldwide and in most cases will upgrade your shipping to a faster UPS shipment complimentary on us to guarantee your wrap arrives as fast as possible =].

Should I choose Matte or Gloss laminate?

Grant Denney the head Scooty Wrapper prefers gloss wraps, however orders are pretty evenly split 50/50 gloss / matte.